TrailersDealersPicturesExperienceContact Us  

Trailers - Flatbed Trailers
Gooseneck & Bumper Pull

Heavy Duty Tag > Air Brake Trailers
Drop Deck King Pin Flatbeds

-------------------------------------------------------------------------------------------------
:: All trailers can be customized to fit your needs.
Visit the Custom Trailers page and let us know what you need.

Standard Equipment
Gooseneck or Bumper Pull Models
See Gooseneck or Bumper Pull pics

  • Lengths from 16' - 53'
  • 12" I-Beam, 14# Frame (19&22# also available)
  • 16" on C. Cross Members
  • 2 x 8 Treated Wood Floor
  • Stake Pockets & Rub Rail on Outside ( 102" wide- 96" available)
  • 12,000 lb. Drop Leg Jack
  • LED Sealed Lights, rubber mounted grommets
  • Wiring in Conduit, Solder & heat shrink connectors standard
  • Elec. Breakaway Kit, w/ charger
  • Rear Drop Stands (where required)
  • Two 7000 lb. Slipper Spring Axles Elec.
  • ST235 - 85R 16" Radials (min.3200# each)
  • Trailers with 20,000 GVW or Higher come with 19" I-Beam, 16" on Center
    • 2 Jacks

     

4' FULL WIDTH MOVABLE BEAVERTAIL

Other Options
-
4" channel cross members
-6" 10 ga. formed side channel
-Extra large stake pockets, 4"wide rub rail
-10,000# spring assist jacks
- 2-speed jacks
- Hydraulic Jacks
- Under mount tool box, tool box built in uprights
- Expanded metal in hitch for storage
- 3/16" plate over wheels
- 3rd slide in 5' ramp
- 3rd fold over center ramp
- Split folding beavertail, double spring assist
- D-Rings, several sizes and locations
- Deck over gooseneck (quote size)

Other options may be available,call for quote

Pictured: 20' deck, 5' Beavertail, 5' HD Equipment ramps- spring assist, Tandem Dually. Deck width 96", 102" total with tie rails.
NOTE: The heavy duty equipment ramps are self standing and support the back of trailer for loading. No need to manually drop stands.


Pictured: NEW Style Combo Beavertail
5' in design, 24" wide ramps, spring assist, lift center to complete a great looking tail.

In the picture below notice the additional neck clearance to fit any application or we can build to fit your needs.12"x19# H-Beam all through the trailer including neck rails.
You won't find a better constructed, better looking and easier towing trailer then a D&K Trailer.


Three fold over spring assist ramps -- Super single 17.5 Wheels


Above is a custom built 4' beavertail design

Check out our line of low-pro trailers for backhoes, trenchers, etc.
Go to utility trailers for additional info.

Circuit Switcher Trailer -- Nebraska Public Power District

Custom-- One of a kind trailer built by D&K custom trailers

Some features are 25K air brake air ride axle ABS
HD hitch suspension, 22.5" wheels on aluminum rims
3/16" aluminum floor laid over tongue & groove wood deck
aluminum 48" storage boxes, aluminum steps front and back
Under frame storage box for the working mechanics of switcher

 

Hydraulic POWER JACK available for any trailer application
Available in single or double, 3,500# & 7,500# models
Distributor for Double R Industries >>> www.doublerindustries.com

Custom Frames and application available, Send us your Ideas

NEW_____ One Rail Tubular Gooseneck

45' Gooseneck flatbed--- 7k triple axle, 17.5" super singles

NEW: split beavertail, spring assist both ways



NEW style 5' Combo Beavertail, also available in a third center ramp.

DROP DECK King pin Trailers >> Custom built to length needed
Pictured with 9' top deck, 90 degree drop to 25' flat deck, 5' Beavertail
HD equipment ramps, self supporting, spring assist, lift center panel
12,000# air brake axles, 16" radial duals, other axles available

 

Below: Hot Shot Trailer built for any kind of hauling
53' total- 8' top deck king pin--42 flat--3' dovetail
perferated steel floor, center rail for ball tower, elec winch
10' aluminum ramps for top or back load, storage area
2/10K torsion elec/hyd disc brakes, 17.5" duals (other axles avaiable)

Beavertail Options
- Stationary Deck, 5' slide under ramps
- Stationary Deck, 5' standup ramps on back
-4' Full Width Pullup Steel Deckplate, 5' slide under ramps or standup on back
-Combo, 5' Fold Down and center moves also, with Deckplate on bottom of ramp for Full Deck, Spring   Assist Ramps
- Equipment Ramp, 5' Fold Over, Spring Assist
- Heavy Duty 3/16" Formed Material, also conforms to under back of trailer for support.
- 6' split folding beavertail double spring assit both ways

Other custom order beavertails available upon request, see custom order page

 

Axle Options
- 6000, 7000, 8000, 9000, 10,000, 12,000
  15,000, 22,500, 25,000
- All Spring Axles, Electric, Hydraulic, Air   Brakes
- 6K- 10K & 12k Axles have Torsion option

NEW: Electic over hydraulic brake option, use with elec. brake controller

Hitch Options
- 3" pintel eye, 4 bolt 35k-60K capacity
- 2 5/16" Gooseneck ( 20K,30K)
- Inverted 5th Wheel
- King Pin Goosenecks

Floor Options
- 2 x 8 Pine Treated Wood
- 1/8" or 3/16" Deck Plate Steel
- 6 1/4" Grating (Exp. metal)
- 1 3/4" Oak Flooring
- Tongue & Groove RUMBER Decking Pictured below
Comes with 12"c cross sills on flat / 9" c. on tilts

Basic colors
RED,BLACK,GRAY
Other colors available

Heavy Duty Flatbed trailer > Super Singles

Built With Pride in the Heartland USA


Heavy Duty Tag Trailers

HD 3" pintle eye coupler, 12K Jack
5' self cleaning Beavertail
5" HD spring assist ramps
20K - 25K Air brake axles, Hutch Suspension
Auto slack, Park brake, ABS axles
Different lengths and options available


Custom Builds and color match applications, Quantity discounts

 

CUSTOM HYDRAULIC "big foot" JACKS >> OAK DECK

Pictured below: air brakes, Apitong hardwood, aluminum rims

-------------------------------------------------------------------------------------------------
:: All trailers can be customized to fit your needs.
Visit the Custom Trailers page and let us know what you need.

 
D&K Trailers