Standard Equipment
Gooseneck or Bumper Pull Models
See Gooseneck or Bumper Pull pics

• Lengths from 16' - 40'
• 12" I-Beam, 14# Frame
• 16" on C. Cross Members
• 2 x 8 CCA Treated Wood Floor
• Stake Pockets & Rub Rail on Outside ( 102" wide- 96" available)
• 10,000 lb. Drop Leg Jack
• Sealed Lights, rubber mounted grommets
• Wiring in Conduit
• Elec. Breakaway Kit, w/ charger
• Rear Drop Stands (where required)
• Two 7000 lb. Slipper Spring Axles Elec.
• ST235 - 85R 16" Radials (min.3200# each)

• Trailers with 20,000 GVW or Higher come with 19" I-Beam, 16" on Center
  • 2 Jacks

   

4' FULL WIDTH MOVABLE BEAVERTAIL

Other Options
-4" channel cross members
-6" 10 ga. formed side channel
-Extra large stake pockets, 4"wide rub rail
-12,500# spring assist jacks
- 2-speed jacks
- Under mount tool box, tool box built in uprights
- Expanded metal in hitch for storage
- 3/16" plate over wheels
- Special RAMP LIFT springs for standup ramps
- 3rd slide in 5' ramp
- 3rd fold over center ramp
- D-Rings, several sizes and locations
- Deck over gooseneck (quote size)

Other options may be available,call for quote

Pictured: 20' deck, 5' Beavertail, 5' HD Equipment ramps- spring assist, Tandem Dually
NOTE: The heavy duty equipment ramps are self standing and support the back of trailer for loading.

Check out our line of low-pro trailers for backhoes, trenchers, etc.
Go to utility trailers for additional info.

Pictured: 5' Combo Beavertail, spring assist level deck ramps w/ pull up center to conform to level deck. Top picture shows all steel on bottom of ramps.

NEW style 5' beavertail, standard equipment for combo, also available in a third center ramp.

Beavertail Options
- Stationary Deck, 5' slide under ramps
- Stationary Deck, 5' standup up ramps on back
-4' Full Width Pullup Steel Deckplate, 5' slide under ramps or standup on back
-Combo, 5' Fold Down and center moves also, with   Deckplate on bottom of ramp for Full Deck, Spring   Assist Ramps
- Equipment Ramp, 5' Fold Over, Spring Assist
- Heavy Duty 3/16" Formed Material, also conforms    to under back of trailer for support.

Other custom order beavertails available upon request, see custom order page

Axle Options
- 6000, 7000, 8000, 9000, 10,000, 12,000
  15,000, 22,500
- All Spring Axles, Electric, Hydraulic, Air   Brakes
- 6K- 10K Axles have Torsion option

NEW: Electic over hydraulic brake option, use with elec. brake controller, replaces surge brakes

Hitch Options
- 3" pintel eye, 4 bolt 35k-60K capacity
- 2 5/16" Gooseneck ( 20K,30K)
- Inverted 5th Wheel
- King Pin Goosenecks

Floor Options
- 2 x 8 CCA Treated Wood
- 1/8" or 3/16" Deck Plate Steel
- 6 1/4" Grating (Exp. metal)
- 1 3/4" Oak Flooring
- Tongue & Groove Flooring --Rubber or Wood

Basic colors
RED,BLACK,GRAY
Other colors available, but may require an upcharge.

Pictured: Heavy Duty Model 150 "Ramp Lift" springs that takes the weight out of
lifting ramps. 6 1/4" expanded metal grating over floor area, built in large tool boxes
Reel racks on trencher trailer, 10 ga. formed and braced fenders, LED lighting.